$39.95

 

This product is a quick UV Filler resin for repairs on polyester surfboards. UV Quick Cure - Polyester Filler Resin has no Fiberfill in it. It is designed to use with the 4oz woven fiberglass provided for strength over holes or cracks which should first be filled with our UV Quick Cure - CABO-FILL Polyester Resin.


CONTENTS:

  • 100ml UV Cure Polyester Filler Resin
  • 5 x Wooden Applicators
  • 1 x Transparent Film Sheet
  • 1 x  Squeegee
  • 1 x paint brush
  • 4 Oz Fibreglass Cloth 27" x 12"
  • Dry Sandpaper #80, #120, #240
  • Wet & Dry Sandpaper #800 #1200


DIRECTIONS:

  • Clean and sand the repair area before applying cloth for a strong bond.
  • For easier sanding and faster curing, cover the resin with the sheet of transparent film provided, use squeegee to flatten it down and shape to the contour of the board.
  • Expose the repaired area to full sunlight for 5-10 minutes.
  • Sand around the cloth area until flat then paint a coat of UV filler resin on top and cure under sun, then sand flat working up with the grades of sandpaper provided.
  • You can scan the QR Code to access the instructional video on how to repair a surfboard with The Surfboard Studio - UV Quick Cure Polyester Filler Resin Kit.
  • Please note that this product is not suitable for use on epoxy boards.

CAUTION:
This product is a quick UV cure for repairs on polyester surfboards only.
DO NOT USE ON EPOXY BOARDS.
Contains Styrene - Keep away from heat, sparks, open flames and most important EPS Foam.

FIRST AID:

  • Prevent skin and eye contact. Do not inhale vapours.
  • lf poisoning occurs, contact a Doctor or Poisons Information Centre:
  • Ph: 131126 Australia
  • Ph: 0800 764 766 New Zealand
  • Eye contact - hold eyelids open and flush with water for 15 minutes and seek medical advice.
  • If swallowed - DO NOT induce vomiting, call doctor.

KEEP OUT OF REACH OF CHILDREN

CAUTION - FLAMMABLE