The Slap Patch is a quick fix surfboard repair kit designed to immediately seal dings on surfboards, SUPs, kayaks, and various other personal water craft. A thin PVC tape patch that will get you back in the water quicker.


  • 5 x Slap Patch (150mm x 100mm)
  • 1 x Scourer
  • 1 x  Orange Plastic Applicator  
  • 1 x Razor Blade
  • 4 x Alcohol Wipes


  • Begin by using the scourer provided in the kit to thoroughly clean the surface area around the ding. Remove any debris, wax, or dirt to ensure optimal adhesion of the Slap Patch. Clean area with alcohol wipe and allow to dry.
  • Use the razor blade included in the kit to carefully cut the Slap Patch to the desired size. Ensure that the patch adequately covers the entire ding, providing sufficient coverage for effective waterproofing.
  • Once the surface is cleaned and the patch is cut to size, carefully place the Slap Patch over the ding. Press down firmly to ensure proper adhesion to the surface. 
  • Use the orange plastic razor blade similarly to a squeegee to eliminate any air bubbles and ensure a secure bond between the patch and the surfboard.  Work outwards from the centre toward the edges.
  • Board is ready to use immediately.